NESS-M1XOV
Part No. 101-211

16 Zone Output Expander
Flying Voltage Leads

Adds 16 voltage outputs to M1 Gold or M1EZ8 Controls. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current devices (50 mA max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output Expanders may be used for a total of 208 outputs. The voltage outputs can be converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s).

FEATURES:

• 16 Voltage Outputs
• Operates on the 4-Wire Data Bus
• DIP Switch Address Settings
• Flash Memory for Firmware Updating
• Two (2) - Twelve (12) Conductor "Flying Lead" Wire Harnesses
• Voltage Outputs may be converted to Relays using M1RB Relay Boards
• Status LED with Diagnostic Display
• Mounts in Enclosure using Ness-SWG Glides, SWP3 Structured Wire Plate, or Double Sided Foam Tape
  

SPECIFICATIONS:

• Outputs: 12 VDC @ 50 mA each
• Wire Harness Length: 12"
• Operating Power Range: 9 to 14 VDC
• Current Draw: 65 mA Nom., 330 mA Max.
• Size: 152 mm x 82.5 mm x 19 mm H